Fender Bassman Fuzz

Bassman® pedals have all your basses covered. Drawing inspiration from the original tube amp line that laid way for Fender’s sub-sonic signal processing, the Bassman pedal line hosts a collection of meticulously crafted analog and digital circuits all curated from the ground up for bass-centric tonal expansion.

Thick and woolly bass fuzz for the ages: cramming decades of bass fuzz tones into a small footprint, the Bassman Fuzz pedal offers two voices of speaker-pumping grit and all the right controls to keep your low end solid. Beyond offering fur drenched, riff-ready gain, this buffer-friendly fuzz can be tamed to balance with your clean lows using the three-position focus switch and blend knob. Select where the fuzz sits in the mix from three focus frequencies: full frequency band, just the mid and high frequencies, or high frequencies only – with each setting leaving plenty of room to blend in the right amount of your clean signal underneath the fuzz.

Features:

• Voice switch selects between compressed vintage fuzz or touch-sensitive modern fuzz
• Internal tone control adjusts the high frequency content of the fuzz
• Soft-touch relay true bypass with auto bypass when no power is present
• Side mounted pad switch to suit active basses
• Top mounted jacks and road-ready aluminum enclosure
• Inset aluminum face plate draws in vintage Fender aesthetics

TWO FUZZ VOICES
Select between a vintage, thick and woolly fuzz voice or a modern dynamic fuzz voice that reacts to playing dynamics.

FOCUS THE FUZZ
The focus switch balances your clean and fuzz signal by selecting between three frequency ranges for the fuzz effect to focus on.

BLEND IN CLEAN TONE
Use the Blend control to mix in unaffected clean signal for the perfect mix of fullness and natural dynamics.

INTERNAL TONE CONTROL
Open the back cover to reveal an internal tone knob for finetuning high frequencies of the fuzz signal.

SOFT-TOUCH RELAY BYPASSING
Relay True bypass switching ensures that when the pedal is off, your signal is clean and clear.

ROAD READY HARDWARE
The rugged aluminum enclosure and metal hardware deliver road-worthy reliability. While the compact size and top-mounted jacks leave room for more pedals on your board.

Specifications:

ELECTRONICS
Inputs
One - 1/4"
Outputs
One - 1/4"
Power Consumption
85mA
Power Requirements
9-Volt Battery or 9VDC Center Negative AC Adapter (not included)

MEASUREMENTS
Product Depth
2.2" (56mm)
Product Height
4.4" (112mm)
Product Width
2.44" (620 mm)

*Specifications subject to change without notice.